Search results for query: *

Would like to know if anyone has had this problem and how to solve it. Put new clips and screws in, had the windshield put in professionally, and was putting the chrome pieces back on, when one of the screws holding the clips on the lower passenger side busted off. I don't know if it was a...

Can someone direct me here or give me some ideas. I know in the past there has been some posts on polishing tail-lite lenses, but just can't find them when you want to. I don't want to spend big bucks here on polishing kits, as the car is not a show car but a well restored driver. All these...

Just need advice on the right way of doing it. I'm putting my 70 Dart 340 back together and my family member and I have a difference of opinion. There are two or three of these clips that are used on the Z-bar and the clutch rod assy. It doesn't show how these things are put on in the manuals...

Can someone help me here. I had taken my 70 Dart Swinger ralley dash bezel apart and had it sent away to have it re-chromed and repainted. The problem is when I took it apart I forgot to mark where the Brake light indicator lens and the high beam indicator lens go. They are the tiny holes on...

Was wondering if there is anywhere I could look up codes, for different components of a car. I would like to know for myself when these parts were made for my car and have it recorded for my records. Example, I have a heater blower motor that I'm about to restore and there are two lines of...

Can someone give me some advice here. Over the years I have taken stuff on and off the car and these parts I somehow don't remember being there. I've seen in different companies that there are replacement rubber seat spacers that go under the bench seats of many cars, but I didn't have any on...

I've looked at a lot of info and can't find a diaghrams or anything on the rear quarter window roll down mechanism. I took mine out when stripping the car (70 Dart) down for a full resto. I took pictures of what I could and numbered the bolts and nuts. But when I took it apart to clean and...

I'm looking for any info or pictures of the large rear stripe that goes on a 1970 Dart Swinger. I borrowed some side views of member's cars of this site that have them being shown off but can't find any top trunk view ones. The reason is that I'm painting the black stripe onto the car and I...

I'm back for some more info. I'm about to clean-up my front plastic grill on my 1970 Dart Swinger when I noticed a couple of tabs busted off the back of the unit. Happened during storage and got pushed around a bit by the kids I guess. No-one seems to know how it happened. (How I would have...

I need some help here guys. I'm restoring my 70 Dart from top to bottom and I've run into a road block here. I'm wanting someone to restore my wiper motor and I can't find anyone that does it anymore. There were a couple of places that did them, like the "Wiper Man" and "Year-One," but they no...

Can anyone of you Pros tell me from experience as this boy has never tried this and was wondering if it can be done to save time and energy. I removed my block from my 1970 Dart Swinger earlier this year, but had removed the rusty headers first before pulling the block out. What a pain in the...

Does anyone know of anyone who restores wiper motors back to their original look. Mine has the wires a little brittle and looks like its had some hard times.

Can anyone tell me if it's possible to get info on a vehicle fender tag that has been destroyed. Purchased the car when it was 3 years old and only had one owner prior to me. The car was made in Windsor Canada and has stayed here all these years Over the years with accidents and replacing...

I have a 70 Dart Swinger that had 5/16 fuel lines. Redoing the car complete and wondering if I put in 3/8 fuel lines with sending unit. The motor has been blueprinted. Running a 750 double pumper for carb,headers etc. Would it be a big deal or would I have trouble later on.