Search results for query: *

All the post i found in a search are dated.... i am looking at stock stuff, not high dollar afyer market options. what is out there with the reservoir attached, that will install easiest? For rack and pinion?

i am looking for the cheapest set of forged 5.7 pistons made. i dont need "quality" lectures, just cheap forged pistons 3.917 bore. who and where do i find them? thanks

i need a set with mounting hardware. Thanks

i need a set for some 6.1 heads 5.7 will work thanks

OVER 1200 miles driven best e.t. 12.11.@112 through exhaust and mufflers 06 shortblock 11 heads/ injectors intake. hhp stage3 n/a cam 82mm throttle body efi.source EFI 2800 converter 727 trans 373 gear 27 inch tall tires drag radials 3300 lbs shifting at 6000(wants more)

i got eagles on early shortblock 11-1 comp what is the best plug to use?

600-ish lift 6500-ish rpm eagle head direct drop in. on the car install.... whats best, out of the box to onto the car?

After talking with mike, he said after a thread on here sales jumped. Who has got the hemi kit but not got to use it yet? who is using it?

i had done a search but still have questions, i didn't want to jack other threads so i started this..06 hemi and alt. in 68 barracuda. megasquirt EM every single wire/plug are brand new. i am using an external regulator. its a 68 single wire configuration. it is the modern electronic version...

i got my hemi started.(2006 alt) but the the alternator is not charging(i used the below diagram) i took the alt to 2 diff. places both said it is good... i have tried 2 different regulators i tried direct grounds on alt.and reg. the hot comes from the alt directly to the battery, no gauge.i...

can the bottom of an injector cause a vacuum leak, yet not leak any fuel?

i need a delete pulley for my 06 5.7 hemi gutting the pump does not work, for long... i know BP has them but $279.. no thanks is there another source?

ok. on my 06 5.7 hemi i just pushed 4 quarts of oil through the bottom pipe plug above the oil filter, i used an electric pump, am i good to go now? is the pump primed? thanks... looking to fire fri/sat..

stock 2006 5.7 short block. stock 2009 eagle heads.injectors and intake.. comp 273 camshaft(in straight) 85mm throttle body. .074 cometic head gaskets.(11.5-1comp) custom push rods. mega squirt 3 professional tuning tti 1 3/4 headers no cats walbro 400 lph fuel pump 3/8 fuel line. what kind of...

you want to mount all the accessories, like alternator, power steering pump, A/C compressor... where do you get all the bolts?

guys.. i need a nice set of low mile non MDS lifters anyone got some they are not using?

putting eagle heads on my 06 block, i will be using .070 gaskets and a comp 273 cam... what length PR do i need?

OK fellas, I'm getting close... doing some wiring, i am using an new style alternator from an 06 hemi, how do i wire it to my 1968 barracuda? i do not have a stock wiring harness, I will be using a mega squirt,

the champion radiator i ordered is to tall, it is taller than the specs. they give. and it looks like it will take an act of congress to correct it. i would like a radiator with the trans cooler built in. and the in and out on the pasenger side.. who did you use?

i am getting my *** kicked getting my shaft to clear the valve cover. i have everything not necessary cut off all the way flush to the firewall. can i get some pics of what other people have? thanks...

2006 5.7 shortblock 2010 5.7 heads and intake i have new 6.1 springs and pushrods 727 trans. 2800 stall converter 3.73 gear 3000lbs 1968 A-body mega squirt management professional tuner stainless works block hugger 13/4 headers thanks

i have read dozens of threads telling me SRT headers will fit in an A body. so i got me a set.... NO WAY, NO HOW! will these fit with a stock steering box, or a hemi Denny rack Kframe, with out HEAVEY steering shaft mods...i might get them to work on my HDK with 4 universals on the steering...

i will run a 6.1 intake...is the swap worth the effort? motor is on a stand, and i have a 4 position timing set. i plan to adv.4*. i have new 6.1 push rods and 6.1 springs. also this is an MDS 5.7 i will plug the solenoids, do i need 6.1 lifters? thanks

in stock a body with 3.91 gear... how much stahl?

has anyone tried any aftermarket headers that are designed for late models cars. i have my engine, now i am collecting parts . some of the shorty headers on ebay for under 200 bucks look promising? has anyone tried this?

yes, no ? the good the bad the ugly thanks

is this good? http://www.efisource.com/shop/ms3-gen3-hemi-plug-play-gold-box/

ok guys if you do not have an ABODY with a new hemi in it i am not interested in you opinions, i need cold hard facts. thanks what exhaust manifolds will fit? what oil pan will fit? should i plan on using a motor plate in front to mount instead of motor mounts..or make mounts? it will be 727...