Search results for query: *

I think I got this EZ wire starting issue figured When using a universal starter switch the ign 2 becomes un necessary When you start the car there in constant power to the coil Im I correct in this assumption or am I going to get into issues, I can get a Moper starter switch and wire it...

My old timing does not anymore whats a good new one to buy these days Not cheap but not to expensive Thanks all

Hi all Im using a EZ Wire kit and I'm stumped on how to wire in the reverse light Do I use the safety neutral switch or something else Anyone that has used there kit knows the instructions are useless Thanks Richard

Hi all I think am missing something I just assembled my Auto Meter Gauge set and wired in the harness Everything went great but I cant seem find where the turn signals, high beam and park brake all hook up in the gauge package. I read over the instructions and they do not discuss this...

Hi everyone I just installed a Ez wire kit and now I have no output from the ecu I get power in from the yellow black wire but nothing out New ecu What can I check

Hey every one Im stumped and ready to pull my last hair out of my head My 68 cuda with an ez wire 21 circuit is nut I have a 4 pin ecu I have a 2 post ballast I have the pink wire set up as per instruction but when I hook up the number 1 pin in the ECU and the voltage drops to 3 v and nothing...

My 68 cuda was a race car and does not have a hazard switch How do I wire in a hazard switch on a toggle switch and help would be appreciated I stumped here Thanks

Hi everyone I am rewiring a 1968 cuda with a 440 I seem to have figured out some of the wiring but when it comes to the alt wire I'm confused My alt has 1 feed which I ran the green wire from the voltage regulator to the pin in the alt The ez wire kit has a red wire called Alt from the fuse...

I am so confused with this ez wire 21 circuit I have no power to either side of the turn signal fuse when I turn on the rear signals both lights go on the fronts turn on but no flash I just rewired a 71 demon with a Ron Francis retro system im now wiring a 68 cuda Thanks for any help

Hi guys Im in need of help and advise I need to know where I can buy the wire ends that connects to the end of the bulb thanks for the help

Hi all Im wiring up a few cars and I have an issue I have a small packard 56 crimper for 18 ga to 24 ga What is the best tool to buy for 10 to 16 ga Thanks all

Hi all Im having some issues or questions with the RF retro moper wiring kit, my issues stem around the factory column wiring and the RF instructions here is my main question Can anyone help me with the ignition connector for my 72 dodge dart demon column key 10 gauge red is power in for the...

Hey all Everything is moving nicely with me rewiring of our 1972 Demon The Ron Francis is ok but confusing at times lots of checking and rechecking lol My question is where do I find the male connector that plug into the light and ignition harnesses Im in Toronto

hey all we are in the process of rewiring our 1972 Demon with a Ron Francis retro 95 kit and I would like to use the stock ignition wiring and turn signal wiring on the steering column Does anyone have the proper wiring diagram for those so we can get this project moving forward We are having...

Hey everyone My package just arrived from EZ wiring and Im about to start the removal of the old wiring I will take and post picture of my progress. Any advise would be helpful Cheers

Hi guys and gals I have 1968 baracuda that was a race car 440 727 fender well headers no front or rear lighting system or wipers and I am trying to get it back on the street. I have spent the past few days looking at the wiring and the butcher job that was done. Im thinking about pulling all he...