Search results for query: *

So I finally had to time to address the issues I had to fix after relocating my dart in my move. So I have a 67 dart with 383 four speed. I swapped out the cast iron 915 heads for edelbrock rpm performers. Do to time constraints I previously put the edelbrock intake and speed demon carb back...

Reaching out to the community. Afb carb correct for 67 383 4 speed a body. Motor never been rebuilt so stock performance. I cleaned and rebuilt the carb and still having some problems. I set floats to factory specs. Installed new jets. primaries are set to stock secondaries 1 step up...

Asking for some help; I have the stock Carter afb 4298s on my 67 383 4 speed formula s and want to upgrade to a bigger cfm Carter that I can just rebuild put on and go. I know that my 67 intake is limited by smaller openings primary 1 7/16" and secondary 1 9/16". Could I for example put on...

I've learned quite a bit rebuilding and fixing my Carter carb. It appears as if I need to replace one of the ports/connections where the PCV hose is routed. I looked at the hole closely and it looks like there is a small lip near the back of the hole. Possibly that is what the port bottoms...

Hoping some of the experts on here could school me. Just rebuilt and cleaned 2 Carter carbs both 4298s. One had two metering rods 65-48 and 65-49. The other had 65-59 and 65-60. Does anyone know what size rods came standard in these carbs. Just to be sure the first # is idle and the second...

I'm attempting to rebuild my Carter afb on my 67 383 Cuba for the first time and have run into some hiccups. I took a picture of the accelerator pump that came out of the carb and the new one that came in the kit. How do I transfer over the needed parts to the new one and why is the pump...

I want to rebuild my stock Carter carburetor that came on my 67 383 4speed formula s. Carb is an AFB 4298s and the motor is basically stock. The carb bogs down a bit when I quickly step on it. I'm hoping a full rebuild that I plan on doing myself will get the carb running great. Any...

Can anyone suggest what are the best reference books to learn how to rebuild/tune Carter AFB and AVS carburators? I'm not very knowledgeable with carburators and want to learn and be able to do this myself on my cars. I was also wondering if it would be fine to upgrade the size of my Carter...

Here is the situation I have a 67 dart that I believe had the gas tank replaced with an original factory setup. I want to replace/upgrade the gas cap that was with the car. Old chrome cap has some pitting. The problem is the correct cap when researched shows a "non pressure release" cap. The...