Search results for query: *

does anyone have a diagram or can tell me what i need to do to bypass my cluster wiring for the turn signals? i know blue and light green are for the left and right signal but that's about it. I have looked at the schematics but its just confusing me more without the the cluster wiring diagram...

I am in the process of redoing my instrument cluster to newer non oem gauges and do not know how to keep the turn signals and anything else that runs through these circuits working, does anyone know how to do this? I am removing the panel and starting with a piece of sheet metal like another...

I'm getting ready to install a new distributor and the directions say to use a coil with less than .7 interanal resistance and no ballast. I understand how to do those but I don't quite get how the mopar ecu plays into this since it only puts out a 6.8-7.3 signal(not sure on exact numbers but...

In the last several weeks I had two people tell me my left brake light was out. The first time I drove it home and checked all the lights and they were good. Yesterday at work same thing. I checked them and sure enough the left brake light was not working. Turned on the taillights and the brake...

What is the minimum voltage I should see at the positive side of the coil with the key in the on position and the car not started? I am running the electronic conversion through an orange mopar box. Should I still see 12 to 13 volts at the + side of the coil? I am only reading about 4 volts at...

I just spent the last week troubleshooting what I thought was a carb issue. I was adjusting my carb and decided to swap out my accel super coil(the big yellow box looking one). Well, I put in another accel super coil but it was just the metal encased chrome one. Once I started driving it I had a...

I picked up a mallory unilite for 30$ I've never used one. Talked to a guy at the mopar shop and he told me they don't even stock them anymore, just the parts. He says they are very unreliable. Has anyone used one with good results?

Sure is nice when you nail the culprit the first time. I have had a nagging problem with my radio and amp for a few months now. It would cut out going over bumps and such. The radio would still play but not through the amp. Well, I guess I pushed in on the rca jacks too much and caused the...

Is it o.k. to mount the battery ground and engine ground to the same place on the frame?

Does anyone make a HEI style cap with male connnectors that will fit a oem style distributor for a small block v-8?