Search results for query: *

Is this a good intake for stock 318 street engine?

I can get an LD4B for $50 more than a Weiand Action Plus, just a stock 318 fun car I drive down the back roads, I know $50 is $50 ,,, any real difference???? Jusr as well have one than the other??

76 Volare roadrunner 318, bbd carter 2 bbl, auto stock everything I figure Mileage reads 95,000, I guess 195,000. Have no idea it has ever been apart. I can not get a constant idle anymore. Warmed up, ran great till recently. I did put a new fuel pump and filter on it. Warmed up, if I...

76 Roadrunner, 318 2 bbl. It started and idled great TILL I removed a too light return spring. I added a new OEM spring, and now will NOT idle. I checked at the throttle shaft and I see it has some play. Can not find that light spring to try it back. Would just a small amount of wobble at...

I can't say I have ever had a car do this. I assume a problem in the internal idle. 71 slant points, 2 bbl carter, just stated dong this after 2 years. Starts up, after I have warmed it up ( choke not working), it will try to die, I goose the throttle, it reves up for a second and...

I have afew good parts I need to list. Can someone look up the application for a carte 625 afb # 9626 sa I believe,... the second digit is hard to read.

This car is a slant Volare, the PO added a small electric fuel pump and BYPASSED the mechanical pump. Yes it starts immediately, runs great, but I do not like the NON dependability of it should the electric pump fail. The mechanical pump does suck air, I want to run the fuel line back with...

anyone with experience with these. no doubt china knockoff of the original carter 2 bbl ''' $87 shipped. cheap. just wondering!!!

can't tell my FSM, the retaining clip for this spring on accel pump, missing on builder carb, I see nothing in rebuild clip that would work to retain the spring? can anyone tell me what type clip it takes???? thanks

where does it go. ?? FSM never mentions it. far as I know, there wasn't one in the carb when I took it apart. there's a ball in the kit.. thanks

trying to rebuild the succer! I can't get the internal idle screw out of it. penetrant, soaking in good carb cleaner, hit the screwdriver pretty good, won't budge. took apart another one for that section, but would like to be able to...

years ago when I was actively building these old cars, I used the pail of NASTY carb cleaner. I have mechanic ( tractor and sometime car) mechanic. he cleans carbs with the good brand of spray carb cleaner. wondering if this is...

anyone know the cast number for the early 273 4 bbl intake that goes to the early #315 head?????? thanks

on my duster, runs fine, i was told it was used on 225 slant, all body types. the fuel inlet is in froont of carb, just wondering what years it was used and if anyone has experience with it. i will jsut say it gets good mileage as i don't want to...

i read all the discuss and opinions in the search on EGR, .... i have a 72 and 76 s/6 dusters, best way to get rid on erg in intake? some say just leave it in there? and why can't i just weld on the little hole shut on thanks EGR plate on side of...

just found i have a crack at carb base where the vacuum advance hose fitting, crack where the tube fits in, small amout of vacuum leak. tube doesn't not have a perfect snug fit like it should. will J B WELD work here or do i need another cure. on 76 /6...

i guess thats the correct name. got a 72 duster and 76 duster, both /6. i've had very few new enough to have this cannister and was usually canned anyway. how does this beast work? vacuum lines run to it, ....on the 72 a fuel vapor or "overflow"? line...

does the /6 holley 1 bbl have a power valve? if so does holley make one now that won't blow out??