[WANTED] 10" Front Drum Brake Setup

[JGC403]

Looking for a complete 10" front drum brake setup. I have 9" drums now and want to go to 10". I'm near Greeneville TN. Hopefully someone has something close.


Thanks,

 

[68original]

I'm not close but have complete set up from 68 Barracuda.

 

[olkingcool]

inbox full

 

[JGC403]

inbox full

Fixed

 

[Charrlie_S]

I would suggest going to front disc. The 10 inch front drums are almost impossible to find, new. I just went through this.

 

[Mojack]

Hi neighbor, I took a 10" set up off some years back. Lower control arms and all. Let me dig them out, they may have surface rust and dirt but probably clean up fine.

 

[Scott_ 69HemiDart]

Contact Craig @mobileparts

 

[72Dart6pack]

I have everything you need. Send me a message. I'll sell cheap

 

[Mojack]

Here we go, just a short drive away. I will pull the drums later today and take pics and measure.

 

[Charrlie_S]

Mojack is good people to deal with.

 

[mobileparts]

As Maxcustody suggested ^^^ above ^^^ , if you want to go with NEW parts, U.S.A. Made parts, and nice soft, supple, *** N.O.S. *** Asbestos *** Brake Shoes, for the smooooooothest braking system known to mankind ,
P.M. me, as per forum rules….
Yours, Craig….

You will need the spindles , backing plates , and hubs from that local guy —- because those are used parts world only…

 

[Mojack]

Pics