Lord Sparky
Well-Known Member
Is there a trick to getting off the bulkhead connectors in the engine compartment? I don't want to break anything. The bottom seems loose, but the top seems stuck. Just pull harder? I don't see any kind of latches.
And the 3 connectors are held in by the tabs on the top and bottom. A pocket screwdriver will get them undone. Just be carefull, 50 year old plastic tabs break easily.View attachment 1715451259
Small line shows the spring. Push there, one at a time while gently pushing the connector to the inside of the car. You may want to unhook your wires first
If you got that far, its prob worth your time and trouble to remove the terminals and then clean them good.A small screwdriver prying up (to the sides--top and bottom) got the three plastic connectors off. The one for the windshield wipers was particularly nasty. Sprayed with Deoxit. Thanks for your help!