Crytot
Member
I purchased a 1981 318 smog motor to supply parts for another project.
When I opened this motor up I found some nice parts and the inside was in good shape.
I changed the timing chain, oil pump, lifters, freeze plugs, and had the heads worked over and put it back together after degreasing and painting everything.
Now I have a nice motor and nothing to put it in. The wife isn't going to like the solution to this problem.
Original purchase
[URL="http://i218.photobucket.com/albums/cc58/Crytot/CompleteUnit.jpg"][/URL]
[URL="http://i218.photobucket.com/albums/cc58/Crytot/Front1.jpg"][/URL]
Intake Manifold
[URL="http://i218.photobucket.com/albums/cc58/Crytot/Manifold.jpg"][/URL]
Block
[URL="http://i218.photobucket.com/albums/cc58/Crytot/Casting.jpg"][/URL]
[URL="http://i218.photobucket.com/albums/cc58/Crytot/20140718_152036.jpg"][/URL]
[URL="http://i218.photobucket.com/albums/cc58/Crytot/20140718_152017.jpg"][/URL]
Getting ready to test
[URL="http://i218.photobucket.com/albums/cc58/Crytot/20140720_111906.jpg"][/URL]
Video of first start. (I didn't have the PCV hooked to the carb yet.)
[ame="http://www.youtube.com/watch?v=EZEAt3FfNEQ"]318 Interceptor - YouTube[/ame]
When I opened this motor up I found some nice parts and the inside was in good shape.
I changed the timing chain, oil pump, lifters, freeze plugs, and had the heads worked over and put it back together after degreasing and painting everything.
Now I have a nice motor and nothing to put it in. The wife isn't going to like the solution to this problem.
Original purchase
[URL="http://i218.photobucket.com/albums/cc58/Crytot/CompleteUnit.jpg"][/URL]
[URL="http://i218.photobucket.com/albums/cc58/Crytot/Front1.jpg"][/URL]
Intake Manifold
[URL="http://i218.photobucket.com/albums/cc58/Crytot/Manifold.jpg"][/URL]
Block
[URL="http://i218.photobucket.com/albums/cc58/Crytot/Casting.jpg"][/URL]
[URL="http://i218.photobucket.com/albums/cc58/Crytot/20140718_152036.jpg"][/URL]
[URL="http://i218.photobucket.com/albums/cc58/Crytot/20140718_152017.jpg"][/URL]
Getting ready to test
[URL="http://i218.photobucket.com/albums/cc58/Crytot/20140720_111906.jpg"][/URL]
Video of first start. (I didn't have the PCV hooked to the carb yet.)
[ame="http://www.youtube.com/watch?v=EZEAt3FfNEQ"]318 Interceptor - YouTube[/ame]