[WANTED] 273 Rods & Crank

-
Status
Not open for further replies.
Ramrunner

Ramrunner

Member
Joined
Nov 30, 2015
Messages
24
Reaction score
0
Location
Anaheim
Rating - 0%
0   0   0
Contact seller
Hey guys I'm looking for a 273 crank and rods for my engine. message me if you have anything and tell me how much you want. Thanks guys,
John
 
Do you want a cast crank (1968-69) or forged (1964-67) or either? The earlier cranks also differ from later cranks in that the snout end that fits into the torque converter is a different diameter and sometimes a spacer ring is required to match the crank to the torque converter. Well, maybe you already knew that.
 
dibbons said:
Do you want a cast crank (1968-69) or forged (1964-67) or either? The earlier cranks also differ from later cranks in that the snout end that fits into the torque converter is a different diameter and sometimes a spacer ring is required to match the crank to the torque converter. Well, maybe you already knew that.
Click to expand...

Looking for a 64-67 forged crank and rods
 
I've got them but wrong side of the country...lol. I'm sure there are ones in CA.
 
I have them all, problem is, I am in Connecticut??????????
 
Is not the 318 and 273 crank the same? If so I have a forged crank from 66 318, good condition, in San Diego.
 
Status
Not open for further replies.
-

Back
Top