[WANTED] 273 Rods & Crank

[Ramrunner]

Hey guys I'm looking for a 273 crank and rods for my engine. message me if you have anything and tell me how much you want. Thanks guys,
John

 

[dibbons]

Do you want a cast crank (1968-69) or forged (1964-67) or either? The earlier cranks also differ from later cranks in that the snout end that fits into the torque converter is a different diameter and sometimes a spacer ring is required to match the crank to the torque converter. Well, maybe you already knew that.

 

[Ramrunner]

Do you want a cast crank (1968-69) or forged (1964-67) or either? The earlier cranks also differ from later cranks in that the snout end that fits into the torque converter is a different diameter and sometimes a spacer ring is required to match the crank to the torque converter. Well, maybe you already knew that.

Looking for a 64-67 forged crank and rods

 

[barracudakid]

i have rods
pm me

 

[moper]

I've got them but wrong side of the country...lol. I'm sure there are ones in CA.

 

[PocketAces]

I have an early 273 crank and rods close to you in Gardena, CA. I'd take $150.

 

[360PLUS]

oops looks like cast crank.

 

[Moparlouie]

I have them all, problem is, I am in Connecticut??????????

 

[titanium]

I have a steel crank from a 67 dart. Located in NY.

 

[Mopar Tim]

Is not the 318 and 273 crank the same? If so I have a forged crank from 66 318, good condition, in San Diego.

 

[cosgig]

Is not the 318 and 273 crank the same? If so I have a forged crank from 66 318, good condition, in San Diego.

Not if he wants one from a 64-66 with the small crank register!!! I believe he said that he was looking for a 64!