4.00" cranks and windage trays...??

[moper]

Yeah, the Milodon pu is good because it doesnt have the reduced ID where the threads are cut. Downside is it's wider there... Always good to rotate the engine after any new part is put on the lower end...

 

[1wild&crazyguy]

now all the dk heads, and you know who you are.., can stfu.

 

[POS Dakota]

I run the Kevko M301 6 quart pan. No windage tray needed and does not hang low.

They're the best pan for the money.
I'm sportin' this one for the POS Dakota. I like brewil's pan, but I'd have to bust out the plasma and welder on my crossmember to make it work.