400hp Pump Gas Roller 340 Strip/Street Build

[cookietruck]

My 360 is 400 HP and that was achieved with Alum heads, Air gap intake, Holley 650 brawler, strong street cam, race ready distributor, headers and 85 gpm fuel pump. Here is a link to blueprint engines which gives their technical specs, might be a good place to start. Chrysler Small Block Compatible 408 c.i. Engine - 465 Horsepower - Base Dressed - Carbureted

Is that a scam?!
$7k off on a 408 stroker motor?!

 

[mopowers]

Is that a scam?!

What do you think?

 

[cookietruck]

What do you think?

One way to find out!!

 

[cookietruck]

My 360 is 400 HP and that was achieved with Alum heads, Air gap intake, Holley 650 brawler, strong street cam, race ready distributor, headers and 85 gpm fuel pump. Here is a link to blueprint engines which gives their technical specs, might be a good place to start. Chrysler Small Block Compatible 408 c.i. Engine - 465 Horsepower - Base Dressed - Carbureted

Also. Would be wise to edit the link to point to the real blueprint engines website.

BluePrint Engines - The Authority in Crate Engines

We give you more than just an engine — but engineering at its finest. And those who drive it, know it. The fanatics. The families. The thrill riders. The joy riders. And everyone in between. No matter who we serve, we share a genuine passion that unites us all on these streets, strips, or any...

blueprintengines.com

 

[red440]

Ratrod the link you provided is a fraud site !!

 

[RustyRatRod]

The smallest I've seen when I wanted to build a kick *** 273 was comp had (don't know if they still do) 229 solid roller, on the dyno program the 273 really liked it, don't about in reality

The one I put in this 402 Chevy big block is 236/243 @.050 on a 106. Ken Heard cut it for us. Goin in a 82 Chevy truck.

 

[crackedback]

Ratrod the link you provided is a fraud site !!

scroll over and its ends with .top, not .com

HUGE SCAM.

Scammers use the base blueprint site name and add other stuff so it's not obvious. That Outlet prior, etc.

Summit had the same deal with a scam site, sent out an email.

 

[autoxcuda]

JOHNSON ? Everytime I hear that name my blood pressure goes up.

What in your experience and opinion is the best hydraulic roller retrofit ?

 

[Oldmanmopar]

That would be a question for my Son.

 

[Dart Frog]

Lot of combinations will get you to your desired power. One thing a lot of people tend to overlook is your machine work. 340s will make decent torque but they really shine if you have one that you can spin up. That takes good ring seal and valve job or you'll just be blowing it all out you're exhaust pipe... Literally