Planning on W2 heads. I have several intakes to choose from.
89-92 roller 360 block would be a good choice, hard to find sometimes.
I used the Hughes 426 stroker kit for the 360 if you use the 23cc dish pistons your compression would be fine for pump gas ,, i changed out the 23cc dish for 13cc dish to up the compression to 11. 4. kit comes with some nice parts engine winds up real quick . good luck with your buildIm considering a Hughes stroker kit with ported W2 race heads. I have Mopar W2 roller and bushed iron rockers with the stands and offset shafts. I also have a W2 Strip dominator intake. I have 318, 340 and 360 La blocks and a 318 and 360 Magnum blocks. I dont yet have a set of W2 headers or a camshaft. I want to run on pump gas and a 4 speed. I have 727's and a 518..... too may parts and too many ways to put it all together. Then i look at my B and RB blocks.....
I used the Hughes 426 stroker kit for the 360 if you use the 23cc dish pistons your compression would be fine for pump gas ,, i changed out the 23cc dish for 13cc dish to up the compression to 11. 4. kit comes with some nice parts engine winds up real quick . good luck with your build
called hughes and ordered custom DSS forged pistons with 13cc dish took about 3 weeks to get themCurious what pistons you used for 13cc. Only off the shelf ones I've found are Icon 9978, but I'd like to have more options.