69GT
Well-Known Member
I picked up a 68 Dart GT convertible and after looking over the car pretty good the last few days I have put together a list of parts I need to get for it. I realize I can get a lot of these parts from Year One and other places but I am on a limited budget so I thought I would post here first to see if anyone could help me out with parts they may be planning on selling. The parts I need are:
Black convertible rear side panels (mine are cracked)
Rear ash trays (mine are rusty)
Gas and brake pedal bezels (car doesn’t have)
A nice brake pedal pad (mine is worn out)
A nice glove box liner (mine is cut up)
A set of straight GT body moldings (almost all of mine are all dented)
One lens for the bullit style fender turn signals
A black convertible top boot cover (mine has a big tear in it)
Lower windshield chrome rubber molding (mine is missing a big chunk)
A nice driver side taillight bezel (mine is pitted)
GT emblems for the trunk lid (mine are pitted)
A license plate light lens (mine has a large crack)
22” radiator fan shroud and bolts (car doesn’t have one)
Complete bumper jack set-up including the spring that holds it in place (all missing)
A nice windshield washer jar with electric pump (missing)
A nice trunk mat (missing)
A radio bezel that has already been cut for an aftermarket radio (I would like to add a cd radio)
A pair of stainless 2 ½” exhaust tips and hangers
Also, some other A-body parts unrelated to the Dart that I am looking for as well:
A pit-free passenger side vent window frame for a 69 Dart
Complete factory automatic kickdown linkage set-up for a 67-69 big block A-body.
68-69 A-boy dash wiring harness for optional accessory light package (ignition, ash tray, glove box and courtesy light with switch). I don't need the entire dash electrical harness, just the optional light package harness.
A 68-69 Barracuda bench seat with center armrest and headrests (prefer located in southeast Michigan so no shipping will be required)
A pair of Moser, Strange, etc. stock A-body length big bolt pattern axles for an 8 ¾ rearend with standard 10”x1 ¾” drums
A pair of heavy duty A-body leaf springs like those found on a 340 car (again southeast MI area for pick-up)
A 73-up A-body small block k-frame with sway bar and lower control arms
A complete 73-up disk brake set-up
A nice pair of polished 15"x7" rally wheel trim rings
A nice pair of polished 14" rally wheel trim rings
If you can help with any of these parts, please PM me. Thanks in advance.
Black convertible rear side panels (mine are cracked)
Rear ash trays (mine are rusty)
Gas and brake pedal bezels (car doesn’t have)
A nice brake pedal pad (mine is worn out)
A nice glove box liner (mine is cut up)
A set of straight GT body moldings (almost all of mine are all dented)
One lens for the bullit style fender turn signals
A black convertible top boot cover (mine has a big tear in it)
Lower windshield chrome rubber molding (mine is missing a big chunk)
A nice driver side taillight bezel (mine is pitted)
GT emblems for the trunk lid (mine are pitted)
A license plate light lens (mine has a large crack)
22” radiator fan shroud and bolts (car doesn’t have one)
Complete bumper jack set-up including the spring that holds it in place (all missing)
A nice windshield washer jar with electric pump (missing)
A nice trunk mat (missing)
A radio bezel that has already been cut for an aftermarket radio (I would like to add a cd radio)
A pair of stainless 2 ½” exhaust tips and hangers
Also, some other A-body parts unrelated to the Dart that I am looking for as well:
A pit-free passenger side vent window frame for a 69 Dart
Complete factory automatic kickdown linkage set-up for a 67-69 big block A-body.
68-69 A-boy dash wiring harness for optional accessory light package (ignition, ash tray, glove box and courtesy light with switch). I don't need the entire dash electrical harness, just the optional light package harness.
A 68-69 Barracuda bench seat with center armrest and headrests (prefer located in southeast Michigan so no shipping will be required)
A pair of Moser, Strange, etc. stock A-body length big bolt pattern axles for an 8 ¾ rearend with standard 10”x1 ¾” drums
A pair of heavy duty A-body leaf springs like those found on a 340 car (again southeast MI area for pick-up)
A 73-up A-body small block k-frame with sway bar and lower control arms
A complete 73-up disk brake set-up
A nice pair of polished 15"x7" rally wheel trim rings
A nice pair of polished 14" rally wheel trim rings
If you can help with any of these parts, please PM me. Thanks in advance.
