73 Scamp

[a68postcar]

Left side looking pretty darn good too

 

[hcallaway]

Really looks nice!!! Super flat from the views I see.

 

[a68postcar]

Im thinking its gonna be pretty good. Thanks for watching.

 

[a68postcar]

So..... p/s fender was pretty bad so we are using one from a friend. Its much better.

 

[a68postcar]

Not too bad for an evenings work. Moving right along

 

[varlo]

Lookin good

 

[a68postcar]

Thanks varlo. We appreciate you following along.

 

[a68postcar]

Im not sure if its visible in the first pic but..... we had to cut the rear of the q/p loose from the tail panel and move it out almost 5/8 at the bottom. Old girl took a pretty good shot sometime in the past. The valence was almost 1/2 inch long at the top where it meets end of q/p. But we made our move and viola..... it fits good now. The q/p extension now fits right too.

 

[a68postcar]

These pics dont show it but the q/p came out pretty good. I think.

 

[a68postcar]

Worked on the right door over the past few evenings and although its not quite there..... its close too.

 

[a68postcar]

Deck lid stripped

 

[a68postcar]

Deck lid etch primed and 2k

 

[a68postcar]

Movin and groovin..... hoping i dont run outa luck.

 

[a68postcar]

Etching primer

 

[a68postcar]

Rear opening

 

[a68postcar]

Deck lid jamb

 

[a68postcar]

1st coat of 2k

 

[a68postcar]

Rear opening

 

[a68postcar]

Door openings were blasted and etch primed

 

[a68postcar]

Then 2k

 

[hcallaway]

Love all the pictures!!

 

[a68postcar]

Love all the pictures!!

Thanks for watching hcallaway. Im going to have to get some of them off of my phone. One thing that cant be said is that i didnt document the work weve done, right or wrong. Its doxd

 

[hcallaway]

Many times I have had to go back and they are a great reference.

 

[a68postcar]

I have projet photo files wit 2000 pics in each. I go back all the time.

Many times I have had to go back and they are a great reference.

 

[a68postcar]

I figured i probably should include this repair. Left q/p in front of the wheel opening. I knew there was a repair there but...... I had to crack it open. Low and Behold the rocker was splattered too.