[WANTED] 9" drum brake rear backing plate 7.25 rear. 1966 Dart.

[Jayman62]

I need only 1. I believe these are interchangable from left to right but I need one for the passenger side rear, needs to be in undamaged and straight condition.

Thank you.

 

[Plymouth 65]

@RAT ROD AL

 

[cudamark]

Those early ones are RH and LH due to the E-brake cable hole.

 

[townsend]

According to the Chrysler literature, the 65 - 67
9 inch backing plate uses part number 2530076-7.
In 1968 those numbers superseded to 2880568-9.
Which means any 9 inch backing plate from 65-76 will work.
If the last number is even it fits the right side.

 

[m76dotcom]

Those early ones are RH and LH due to the E-brake cable hole.

I need only 1. I believe these are interchangable from left to right but I need one for the passenger side rear, needs to be in undamaged and straight condition.

Thank you.

 

[m76dotcom]

Is this what u need

 

[cudamark]

Is this what u need

View attachment 1716471383

That looks like one for an 8 3/4.

 

[Jayman62]

My plate has 4 holes.

 

[Charrlie_S]

Plate for a 7 1/4 small bolt pattern has 4 mounting holes. Plate for the large bolt pattern 7 1/4 has 5 mounting holes, Plate for a 8 3/4 has 5 mounting holes.

 

[m76dotcom]

Is this what u need

 

[Jayman62]

Is this what u need

View attachment 1716472093

No that's not what I have, thanks.

Jay