MachineMan
Remove Before Flight
Check back in this thread, someone else spoke up too.
~ A Bunch Of Car Stuff ~
- Thread starter MachineMan
- Start date
-
- Status
Check back in this thread, someone else spoke up too.
66340SEDAN
FABO Member #3649
I only seen Leanna's interest in it.
MachineMan
Remove Before Flight
MachineMan
Remove Before Flight
.
This is nice.............
Exhaust temp gauge, in the box with bracket and hardware.
Dust behind the glass, housing slips off after removing three small screws....
ISSPRO, Portland, Oregon
This is nice.............
Exhaust temp gauge, in the box with bracket and hardware.
Dust behind the glass, housing slips off after removing three small screws....
ISSPRO, Portland, Oregon
zhandfull
Well-Known Member
These items interest me, not sure what they all do but I'm interested.
maybe a picture and PM me a price.
Thanks
Mark
MachineMan
Remove Before Flight
Not a problem, "This" is the type of stuff I know as well as the most experienced member here knows A Bodies.
I under 5 minutes I can bring up up to speed on the "Hundreds" of uses for these instruments.
Prices of all the stuff in these boxes will be reasonable.
And "No reasonable offer will be refused"
grassy
Well-Known Member
Would like the coil please..a pic and a price please.
Thank- you
ian.
I try not to be on the computer that time of night..it reminds me of how much work I used to do in the hospitals at that time of night..you wouldn't believe the spooky sh*t that happens after 12 in old hospitals..
Thank- you
ian.
I try not to be on the computer that time of night..it reminds me of how much work I used to do in the hospitals at that time of night..you wouldn't believe the spooky sh*t that happens after 12 in old hospitals..
MachineMan
Remove Before Flight
So you have seen em' too............
Out of the corner of your eye
Just got a chill.........
I don't know what the coil is worth, ......I'll look on eBay....
Ok there it's $40.00 and $10.00 shipping.(for new)
maybe... $25.00 and 5 bucks shipping.
This one needs two rubber feet.
I'll send along some single use urethane adhesive packs, in case you want to do the repair.
MSD Part number 8207
SOLD
I remember making that little aluminum mounting plate for this same guy that laid these boxes on me.
He brought over a piece of material and left with it under his hood.
Let me know
MachineMan
Remove Before Flight
LOL :wave:
MachineMan
Remove Before Flight
.
Two Rochester oil pressure gauges
PN 2525-5-173
A S&W OEM looking fuel gauge
A S&W water temp gauge in the box
PN 9-311-W 12V
^
This number is half off the box, could be a 0
Two Rochester oil pressure gauges
PN 2525-5-173
A S&W OEM looking fuel gauge
A S&W water temp gauge in the box
PN 9-311-W 12V
^
This number is half off the box, could be a 0
MachineMan
Remove Before Flight
I justed posted it, you are first in line on that unit
Make a reasonable offer, I'll go for it.....
Like a if you got a good deal at the swap meet but allow 5 bucks for shipping.
I am still digging.....
66340SEDAN
FABO Member #3649
Could we get pics of the sending units?
I am interested in the Mopar light bracket.
MachineMan
Remove Before Flight
Sure, I will put a whole herd of them in a photo, then you guys can ask away....
All reasonable offers accepted, + some cheap shipping.
,
give me about 8 minutes....
.
1wild&crazyguy
Banned
If any are fuel tank senders for a body, I'll take 1-2.
The rest might want to keep with the matched gauges.
The rest might want to keep with the matched gauges.
MachineMan
Remove Before Flight
You guys would have to help me with part numbers, ther is a ton of this stuff.
Both oil & water....
.
- Status
-
