Dec 24, 2010 #1 SRT_DSTRHOLC "There is never enough horsepower...." Joined Mar 20, 2008 Messages 6,553 Reaction score 248 Location California How do I go about adjusting my rear drum brakes, to make sure the drum is not to loose or to tight and so on.
How do I go about adjusting my rear drum brakes, to make sure the drum is not to loose or to tight and so on.
Dec 24, 2010 #2 daredevil Well-Known Member Joined May 19, 2007 Messages 10,984 Reaction score 262 Location S/w Houston just adjust to a slight drag and they will wear in.
Dec 25, 2010 #3 SRT_DSTRHOLC "There is never enough horsepower...." Joined Mar 20, 2008 Messages 6,553 Reaction score 248 Location California hmm ok, ill see what I can do, this is my first time putting brakes together...
Dec 25, 2010 #4 green1 Well-Known Member Joined Dec 6, 2008 Messages 4,639 Reaction score 68 Location Orange Park, Fla Adjust, step on the brakes to center them, then adjust again.
Dec 25, 2010 #5 67Dart273 FABO Gold Member FABO Gold Member Joined Oct 14, 2010 Messages 62,697 Reaction score 37,144 Location Idaho Here's what you REALLY do. Adjust them up until you can NOT turn the tire by hand, then back off until they just "scratch" a little, count the clicks and try to get the same feel on each side.
Here's what you REALLY do. Adjust them up until you can NOT turn the tire by hand, then back off until they just "scratch" a little, count the clicks and try to get the same feel on each side.