adjusting end play on axels

[gotdust57@yahoo]

i have a 73 duster with open end 8.75 and am changing to suregrip i noticed a little more end play then i want, my axels are already out and i see the adjuster on passenger axel, could someone tell me how to adjust it please? thanks

 

[KP]

i have a 73 duster with open end 8.75 and am changing to suregrip i noticed a little more end play then i want, my axels are already out and i see the adjuster on passenger axel, could someone tell me how to adjust it please? thanks

I had to do this when I changed my axels from SBP to LBP.

I just did a search on the net and found a step my step site.

Sorry but I cannot remember the site.

Hope this helps...

 

[GoodysGotaCuda]

Torque down both sides to spec, then using the adjuster wheel, dial in how much endplay. i think the spec is .008" - .015" off the top of my head. Then there should be a lock tab on one of the axle studs, loosen the nut, place the lock inbetween the slots on the adjuster and torque it down to hold it in place

 

[gotdust57@yahoo]

thanks all

 

[FASTBACK340]

Just to prove I do more around here than aggravate people....

http://www.moparmusclemagazine.com/howto/155_0308_mopar_rear_end_gears_set_up/index.html