turbofreek
batcrap crazy racing team
Here's the start of mine. The speedo and tach aren't there yet but you get the idea. Has a rolled edge for a more finished look on the insert.
What guages are those? I like them a lot.
Here's the start of mine. The speedo and tach aren't there yet but you get the idea. Has a rolled edge for a more finished look on the insert.
So is the non matching guages part of the plan? Looks great otherwise. I really like the layout a bunch.
The speedo was from the parts pile. If you look real close, the four red guarded switches don't match each other either.
The first two are from the power distribution panel on the flight engineer's station from a TWA 727-231. The other two are cheapie Chinese switches from Napa.
Actually, none of the gauges match. The tach is at least 25 years old, and been in at least 3 cars, the oil pressure and temp aren't much newer. The fuel and voltmeter gauges are jeg's from last year.
But the whole car is put together like that.
The HD Dana 60 is from a Chevy 1 ton pickup that I cut down myself.
I'm kinda cheap. but maybe I can start a musclecar rat rod thing?
heres mine
What guages are those? I like them a lot.
Man the speedhut gauges are expensive damn. Sure are nice though.
Diggin' this thread,Quick question to anyone out there,,,Do you cut and splice if you are using the factory under dash harness? or is some company making a plug that you hook the aftermarket gauges to?