Almost done

-

Bgdude1

Well-Known Member
Joined
Nov 15, 2020
Messages
68
Reaction score
71
Location
Midwest
Waiting on engine to return.
48 Degree Ritter
T and D 1.6 Rockers
Comp roller 735 max lift
BAM lifters
Scat rotating (I think)
Wiseco 14.1
Indy 360-1 ported to 255
Indy 360-2 intake
950 Holley
Made 697hp 540 torque in an X block
Hoping to gain 115 hp with W9 heads and 4.125 bore (later)
4.040 bore
4.00 stroke
 
Not yet. Supposed to have pics this week. Ended up with an R3 block instead of the Ritter. Found a cam core at Bullett.
 
Wasn’t it the exhaust ports on those?

I don’t recall ever hearing of the intake ports leaking.


There used to be a real good post on Yellowbullet about the 245 cnc’d heads. I have two sitting here that were leakers and yes on these it was the exhaust ports. I’ll have to try to find that post as I thought the intake side had issues too. Man I know those 245 heads make my 360-1 heads look like stock Speedmaster heads. Lol
 
Whoa, that’s gonna make something move! Any reason you went with the R3 over the Ritter?
 
Going in a 72’ Duster.
Dana 60
4:10
Ladder bar car
727
Trans brake
3150 w/driver
 
A few pics of the build...

R3 3.jpg


R3 2.jpg


R3 1.jpg


Indy pushrod mod for 48°.jpg
 
-
Back
Top