dustermaniac
Senior Member
Thanks for the tip. Wix it is from this point forward.
Thanks for the tip. Wix it is from this point forward.
I was surprised to see all that fiber like material in the screen. I never thought that would be there, I used a pair of tweezers to get it all out and flushed it clean and used the compressor to blow air through it. After that I bathed it with brakecleen. Pick up tube looked like new after I was finished with it. I was honestly expecting to see shards of metal.
Crankcase breather cap has a fiber element that can get sucked into the engine.
Crankcase breather cap has a fiber element that can get sucked into the engine.
Just read through your thread glad to hear everything is good. How did you clean off the old gasket material? Did you use a scraper or a 3M roloc whizzy wheel on 1/4" diegrinder. I did a intake years ago on 4.3 gm v6 and it came back couple days later knocking in lower end. pulled engine and inspected and found same type material. Figured it came from the 3M fiber roloc disc. Just a thought and my .02 cents. Defently glad to hear it good.
Randy
Used a gasket scraper.
Thanks for the heads up/ Where do you get em? Dealer only?
Thanks Cliff and Petty!!
Yes Petty said it was better than Wix called Mopar High Performance filter and it's Black