Bluetooth amp on order, questioning how to wire 3 speakers?

[skep419]

I'm looking to wire up 2 rear 6x9's and one front speaker. Only thing I'm finding is to wire the center speaker using both positives (not sure how that would work). Thanks.

https://www.amazon.com/Bluetooth-Subwoofer-Amplifier-Speakers-Password/dp/B08L4D2Z79/?tag=fabo03-20

 

[69FBCuda]

So no front and rear separation? No way to control the volume front vs rear?

 

[skep419]

So no front and rear separation? No way to control the volume front vs rear?

Correct, doesn't have to be perfect, just don't want to wreck anything. Going from a single bluetooth speaker on the dash it should be way better.

 

[TF360]

If you can get 2 6x9's in the back, it will sound great.

 

[jos51700]

I thought you needed a four channel amp for that?

 

[halfafish]

I did this three times, but with different equipment. In two cars, I made a mounting plate to hold a pair of 3" or 3.5" speakers in the dash location with a pair of 6x9's in the rear. In the truck I used a dual voice coil 4x10 in the dash with some smaller oddball speakers (like 5x7 or something?) in the rear pillars. All three are driven by a 4-channel head unit, about 20W per channel. I'm a hardcore audio guy and it makes plenty of volume - especially when I added a nice powered sub.

I don't know that using that 2-channel amp will work well with impedences on a three-speaker system.

 

[glenn340]

I have a similar Bluetooth amp in 2 cars. Just hooked up the rear speakers and it sounds great. Left the front speaker connected to the factory radio.

https://www.forabodiesonly.com/mopar/threads/new-bluetooth-only-stereo-install.527226/

 

[CRUZE 418]

S&M Electro in Blaine, Minnesota has a front two speaker that will bolt right into position where your single front speaker is.

 

[skep419]

Sounds like if I want to have more than 2 speakers I'm gonna have to use something like this.

https://www.ebay.com/itm/124922747470?_skw=JL+Audio+MBT-RX&itmmeta=01KYSJGAP9SA8J32TJ6HZB5495&hash=item1d15f9da4e:g:k2QAAOSwOsFms8Xk&itmprp=enc:AQALAAAA0GfYFPkwiKCW4ZNSs2u11xCEWZOvYNim/+fAxRjITfRwaOfDbRb1qme+7Mb+Fybq02zsLW5w0w8Ju1V96C8MxlPM6WMUfbXTS5XkBeE42J6vXTiLqNil+3tjwDlbr0aOu6owxeadyvWy/5+AJ40HoeGnQvR5t8NNewMCFLiXdwESFquHHkItJiivNAG8jYlXSoYEWngX6t4Zw4n0FSl+i4kVTRedWCz7caJpIoNCNv51R/x2UvoQLTYaXnV+3LqPHZz9VsuxdvA2nTmWXkFdZXI=|tkp:Bk9SR6KrwbL2Zw

https://www.ebay.com/itm/3151838334...opMknYEV4So5wmJvYz2K6njLS3kEIhKRoCpkwQAvD_BwE

 

[halfafish]

That looks like a workable deal.

 

[MOPAROFFICIAL]

Get a monoblock and jump off of the two channels as a high level input..lol

But really you need a four Channel amp and would essentially Bridge two of the channels for the center speaker to be mono. I worked at a stereo shop just before becoming a mechanic and did installs. You can't even run series off of that two channel because then you'll have one channel that's overloaded with two speakers from an impedance imbalance