Got the boxes mounted. Just need to mount the solenoid then I’ll be ready to run these wires. Think somewhere in this circle area would be suitable for the solenoid?
Ok. See if this is any closer to making sense. The purple (start) wire goes from the start button to the NSS, then out to the small s terminal on the solenoid. The shifter switch grounds when the shifter is in park or neutral to complete the circuit (if I understand correctly.) So purple wire at both poles of this switch which grounds when in those positions? Purple in and then out to solenoid?
Got the boxes mounted. Just need to mount the solenoid then I’ll be ready to run these wires. Think somewhere in this circle area would be suitable for the solenoid?
That location on the firewall should work for the solenoid and it's proximity to starter. Consider how you will route the battery cable from the back, clearance to headers, and heat soak.