Build me a Low deck bracket motor

[Bickel Motors]

Just acquired 2600 lb A body 4 link roller. Looking to build low deck 4.15 stroke bracket engine. Leaning towards 270 Trick Flows for heads. Goal is mid 9's. Lots of knowledge out here. What do you all suggest. Longevity is key, will run multiple classes. Thanks for your input

 

[rumblefish360]

Look up member AndyF. Also IQ52.

 

[Brian Hafliger]

Just acquired 2600 lb A body 4 link roller. Looking to build low deck 4.15 stroke bracket engine. Leaning towards 270 Trick Flows for heads. Goal is mid 9's. Lots of knowledge out here. What do you all suggest. Longevity is key, will run multiple classes. Thanks for your input

Our typical bracket build makes 750+ using the TF 270 heads, solid roller cam, 14:1 and a 440 block with caps, hard block is optional. We use the Victor intake and 1050 carb, will go hundreds and hundreds of passes before needing freshening.

 

[rumblefish360]

Whoooooops! Sorry Brian, I forgot you!

Our typical bracket build makes 750+ using the TF 270 heads, solid roller cam, 14:1 and a 440 block with caps, hard block is optional. We use the Victor intake and 1050 carb, will go hundreds and hundreds of passes before needing freshening.

 

[Bickel Motors]

ou812, Do you like the low deck or tall deck better? I have both.

 

[Brian Hafliger]

ou812, Do you like the low deck or tall deck better? I have both.

We can use either to be honest, both perform well. The low deck fits a bit better in A bodies, otherwise it's up to the customer.

 

[oldkimmer]

Hi Brian, What do u use for a rotating assambly. Thanks. Kim

 

[oldkimmer]

Bickel and Brian, ur inboxes are full. Kim

 

[Brian Hafliger]

Bickel and Brian, ur inboxes are full. Kim

Cleaned out! We use Molnar or Scat on these types of builds...

 

[oldkimmer]

Thanks Brian. Kim

 

[Bickel Motors]

Will clean out my inbox, Thanks. Molnar is on my radar for parts. what rockers are best on 270 TF's