kingvern
Well-Known Member
Ok so has anyone ever degreed a cam and it came up dot to dot. The machine shop I used to assemble my engine says he degreed it and it came up right at dot to dot. I have never had this happen so i'm wondering if any of you have. here is the cam specs. Lunati part #
30200913
Advertised Duration (Int/Exh): 282/282
Duration @ .050 (Int/Exh): 255/255
Gross Valve Lift (Int/Exh): .582/.582
LSA/ICL: 108/102
Valve Lash (Int/Exh): .016/.016
RPM Range: 3500-7200
30200913
Advertised Duration (Int/Exh): 282/282
Duration @ .050 (Int/Exh): 255/255
Gross Valve Lift (Int/Exh): .582/.582
LSA/ICL: 108/102
Valve Lash (Int/Exh): .016/.016
RPM Range: 3500-7200