74desertduster
Well-Known Member
I have a good amount of upper tire lean inward going on with my 71 Swinger.
I have done the wheel bearings so it's not that. I am thinking I need UCA bushings and upper ball joints....no play in them but look old as the hills and worn.
I am wondering if this much leaning in could just be negative camber and I just need an alignment? I know it is hard to see in the pics...best I could do.
Thanks
Brian
I have done the wheel bearings so it's not that. I am thinking I need UCA bushings and upper ball joints....no play in them but look old as the hills and worn.
I am wondering if this much leaning in could just be negative camber and I just need an alignment? I know it is hard to see in the pics...best I could do.
Thanks
Brian















