1994rm250
Well-Known Member
every wire is hooked up on the car except the 727 trans ,, is that why my car isnt starting with a key ? how do i hook this up from the 6 cyclinder to 727 ? thank you guys from the help:clock:
There should be a wire with a eyelet style connector coming from the wire harness. I think its brown or brown with yellow. Hook it up to this:it is not connected how tdo i hook this up from the 6 cyclinder to 727 ? or by pass it
the 727 uses a 3 prong ? and the cyl 904 use's 1 prong ? ?
Angelo, I used some wire connectors, round female style from Radio Shack. I cut the OE wires from the plastic connector and after I put on the round female connectors, I just pushed it onto the prongs on the switch.
Pay attention to the order in which they would go on if the wires were still in the plastic cap.