Changing the Ignition help?

[75PlymouthD]

So I am stuck at this part. Anyone know what to do next? And offer step by step details on how to do the rest? Thanks!

 

[BillGrissom]

There is a post with very detailed photos to take your further into your "key in column". Search for it. Was linked to just a month ago. Next step is remove the turn signal switch. Remove the pins from the connector at bottom of column using a small screwdriver to release them. Don't cut the wires like monkey mechanics often do.

 

[75PlymouthD]

So I am stuck at this part. Anyone know what to do next? And offer step by step details on how to do the rest? Thanks!

There is a post with very detailed photos to take your further into your "key in column". Search for it. Was linked to just a month ago. Next step is remove the turn signal switch. Remove the pins from the connector at bottom of column using a small screwdriver to release them. Don't cut the wires like monkey mechanics often do.

Okay I'll go look, thanks!

 

[75PlymouthD]

I got the middle part loosened off, but I can't find the pins.

 

[BillGrissom]

I was referring to the pins (terminals) that are in the wiring connector, that comes out of the lower part of the steering column. I haven't worked on a 75 which uses a different connector, but I am sure there is fairly simple way to release the metal pins from the plastic housing.

 

[abodyjoe]

scroll down this thread a little.. i have step by step directions with pictures...

http://www.forabodiesonly.com/mopar/showthread.php?t=163786&highlight=key+column



.

 

[RedFish]

Compare the new aftermarket switch to your original closely. At one time there were some that had an extra wire on them.