Converting '67 Dart trim to '68 Dart stainless trim "where to buy clip studs"

[duster360]

I am converting my '67 Dart windshield gasket and trim to '68 Dart gasket and stainless trim. Anyone know where I can get the studs that go around the windshield that the clips attach to?

 

[Rocky_JS]

they aren't studs but Phillips screws. you will need to remove the glass to install, if not already.
here is one source, but there are many including ebay.
http://www.herbsparts.com/products.asp?cat=360

 

[duster360]

I thought the factory cars had small studs that the trim clips snapped onto?

 

[cuda20]

Factory cars had studs but you will need screws. They will be supplied with the clips. I did this swap with my 67 cuda.

 

[RedFish]

The factory used studs on a lot of body trim including vinyl top trim but only where a plastic clip was used. Window reveal mouldings all used steel clips and special screws.
Common hardware store screws will work if you use #6 X 3/8 round head phillips.
the special screws are #8 diameter with the #6 screws head. I hope this explains why clip packages include the screws.

 

[duster360]

Ok. I appreciate the info fellas. I will be ordering the clip package with the screws. Thanks.