G Gimike812 Well-Known Member Joined May 27, 2015 Messages 52 Reaction score 14 Location Tucson AZ Mar 1, 2020 #1 Can this plastic piece at the bottom of the distributor be replaced? If so where can I find one?
Mattax Just the facts, ma'am FABO Gold Member Joined Feb 7, 2013 Messages 17,893 Reaction score 14,904 Location Phila. Pa Mar 1, 2020 #2 Yes. Drive the pin and put another on.
MoparMike1974 FABO Gold Member FABO Gold Member Joined Jun 16, 2017 Messages 4,574 Reaction score 4,373 Location Maryland Mar 1, 2020 #3 Last one I replaced I machined out of delrin.
Dana67Dart The parts you don't add don't cause you no trouble FABO Gold Member Joined Jul 16, 2017 Messages 15,034 Reaction score 12,370 Location Northern Colorado Mar 1, 2020 #4 Someone on FABO was selling a metal machined replacement. Last edited by a moderator: Mar 1, 2020
Demonic Well-Known Member Joined Mar 21, 2015 Messages 2,327 Reaction score 2,118 Location Mid Atlantic Mar 1, 2020 #5 @halifaxhops
toolmanmike Moderator Staff member FABO Gold Member Joined Jan 18, 2006 Messages 84,248 Reaction score 95,087 Location Office Mar 1, 2020 #6 Demonic said: @halifaxhops Click to expand... Yep. @halifaxhops is the guy that can help.
mbaird mbaird Joined Dec 10, 2005 Messages 9,362 Reaction score 6,575 Location Boise, Id Mar 1, 2020 #7 I found a brass bushing at the hardware store that fit perfectly ! I just had to drill the roll pin holes .
I found a brass bushing at the hardware store that fit perfectly ! I just had to drill the roll pin holes .
halifaxhops It's going to get stupid around here! FABO Gold Member Joined Jan 20, 2014 Messages 87,562 Reaction score 68,192 Location Hoppyworld, PA Mar 2, 2020 #8 Whatever you do do not use those big shaft collars with a set screw, they limit the oil from getting into the bottom of the distributor and you will be changing bushings. I have some shoot me a PM if you need a set.
Whatever you do do not use those big shaft collars with a set screw, they limit the oil from getting into the bottom of the distributor and you will be changing bushings. I have some shoot me a PM if you need a set.