Early-A Front Sway Bushings...

[grimreaper]

I just ordered the Moog K7061 and they should arrive at my local store on Monday. If the bushings fit I'll be pleased to put them on my Valiant. If not, I can always use the end link bushings and pieces.

Surprise, surprise. The bushings didn't arrive today. The computer inventory wasn't correct. Now, at the store they say Thursday. I'll update then.

 

[pishta]

PST sells these but they are not original obviously

looks like a 67 and up application though...

Layson sells a "GG-80C" 7/8 all Mopar 57-65 that may be correct if someone has a catalog for 8.80 a side..probably the cheapest thing in the catalog!

 

[cudamark]

PST sells these but they are not original obviously

looks like a 67 and up application though...

Layson sells a "GG-80C" 7/8 all Mopar 57-65 that may be correct if someone has a catalog for 8.80 a side..probably the cheapest thing in the catalog!

I looked on their web site and it lists 4 different ones but no picture. Strange that it shows them fitting the '65 model but not the '66. Maybe Rick can post a good photo and shed some light on the applications.

 

[dart4forte]

I have a complete sway bar kit from PST I'll sell.

 

[chryslerfat]

Surprise, surprise. The bushings didn't arrive today. The computer inventory wasn't correct. Now, at the store they say Thursday. I'll update then.

Any word yet?

 

[grimreaper]

The bushing kit arrive Thursday around 5:00 so I didn't pick it up until Friday and then didn't get around to working with it until today. The bushing fits the bracket nicely but it is a sloppy fit on the 7/8 sway bar even when the clamp is squeezed tightly. Sloppy enough that I won't be using them. I'll give 'em to my buddy with a Fury. I did get a local guy who makes circle track bushings and parts pour some from 80 dur urethane for me. They fit nicely, can be made to accept grease and, I believe, work well.

 

[Bogie]

I spoke to John @ PolyBushings.com he said he would produce them if there was enough interest in them

 

[grimreaper]

Or, if anyone is interested in the ones I had molded, which look like this installed, let me know. I had a few extra made. One for another member and then another person wanted some but it turned out he was unable to get the sway bar. Anyway, I had a few extra made as spares and a few to help a few friends. Probably not professional quality but should be very servicable if you need bushings.

 

[65Valiant310]

I thought the originals were 13/16, not 7/8...