Thanks Rbob ! 1 pic is worth a thousand words. As I look at your 2nd picture,what I have is the cable stops just as it comes out of the Transmission cross member and hooks into an adjustable bracket. This bracket holds a cable that loops between the 2 rear emergency/parking brake cables that come out of the backing plates from the brake shoe assembly. Mine actually crosses over to the Pass. side down the car at about 45 degrees, running under the Drive shaft to connect to the pass side rear wheel. This 1 can pass between the pass side floorboard and the sub frame connector with no problem. Now that I have seen the pics. of what you did, I can make my plan of attack with a different prospective. Thanks for your suggestions everyone! Tim