Turbo440Dart
crank runner over-er
It’s officially official after 10 years.
Figured id share my garbage..
- Thread starter Turbo440Dart
- Start date
-
TT5.9mag
Two atmospheres are better than one
Turbo440Dart
crank runner over-er
The drive home was like magic buddy. Letting it just hum along down sixth, arm out the window. Missed that feeling.
DieWilde13
Well-Known Member
Congrats!
Bobzilla
Well-Known Member
Congratulations. Welcome to married life.
AirForceRacer
Mopar or No Car
Yay buddy!!!!
Turbo440Dart
crank runner over-er
Haven’t touched the car lately. Hot/work/life. Meant to pull it out and turn it around to start on finishing some suspension changes to the front and before I knew it I was cruising the neighborhood. I’ll be half attempting to square it away for December and trying to get a race pass for the MoonEyes event at Pomona. Needs the tune cleaned up, finish suspension, play with the cooling system and potentially put a slick on it instead of the radials for the track. Plenty of time.
Dartswinger70
Well-Known Member
Nice to have a driver, even if it's not as you'd like it to be.
Turbo440Dart
crank runner over-er
with that kinda talk i might just show up in one of my slow *** crap cans for comedic value and to offer moral support.
Matts440
Well-Known Member
That would be a blast
Turbo440Dart
crank runner over-er
They seem to be few and far between that’s for sure.
Matts440
Well-Known Member
If I can get my crap box to run again next time I come down to visit my in laws I'll hit you up and bring my car down. Just just live down Van Buren by bellegrave
Turbo440Dart
crank runner over-er
Not far at all. I’m sure we could manage a couple cars to come out and cruise and this “should” be ironed out by then. I grew up right over there so I can find my way easily
Turbo440Dart
crank runner over-er
Calling it a night. But hey @junkyardhero im finally using those spindles I got from you 2 years ago. 
NO WARRANTY!!Calling it a night. But hey @junkyardhero im finally using those spindles I got from you 2 years ago.
View attachment 1716430468
looking good bro! making some headway!
Turbo440Dart
crank runner over-er
Drove it a few weekends ago with the “new” suspension. Turned the boost controller all the way down and set the radials to 15psi. Pedaled it a couple times in 2nd and it hooked and felt real good. Needs to go back on the rollers and clean up the tune. Then I’ll be going to a “private” road for some testing. I’ll make sure to drag @TT5.9mag with me.
Turbo440Dart
crank runner over-er
Turbo440Dart
crank runner over-er
The guesses are in. Tomorrow we see what happens. @TT5.9mag @junkyardhero got their guesses locked in.
in my defense, @TT5.9mag rang me up out of the blue and pop quizzed me on a number and that was my shoot from the hip answer. the added +32 to make it 568 was after i had a moment to look up the cam specs and have a think on the rest of the combo.
should be a large time y'all, sorry i'm gonna miss it!
should be a large time y'all, sorry i'm gonna miss it!
-
Similar threads
