Blown/leaking power valve. Wrong/bad gaskets.
Heat soak may also cause the fuel to boil... Run the 5/16" thermal insulating gasket....
Edelbrock Heat Insulator Gasket
hum, what am I missing here. too high, should be at the bottomFuel level is about half way up the sight glass.
hum, what am I missing here. too high, should be at the bottom
I am currently using a Carter mechanical pump regulated to 6 1/2 psi I got from Mancini. I have also tried the 5 psi stock pump from the local parts store with the same results.Open will be fine. U may have too much fuel pressure. Kim
Yes,it’s a shield the keeps heat off the fuel bowls. They have been around since the 70s. They do help a lot. The thick gasket/spacer is prolly better. Kim