Got my heads ported
- Thread starter oldkimmer
- Start date
-
Those look nice Mike. Kim
Teaser
Come on! give us a show! LOL
I’m still 4 hours from home. Ill make a pit stop later
Well since u asked so nice Mike here is a few
Wow, those are nice. I am late to the party. What brand?
It's an Indy SR, the #'s will be close to what many others have already done if they know what they are doing.
It looks to me like the shop did some fine work on the heads.
mopowers
Well-Known Member
What's a port job like that cost these days??
$1200.00 Canadian just for the porting. Then a valve job, setting up the heads, milling them some and vapor cleaning. $2000.00 total for everything. Oh ya I got some stickers
MOPAROFFICIAL
If it has tits, it's a liabilititty.
Exactly. Many here are gushing over the finish .
Well if someone can help me I’ll post the flow sheet. I have an I phone XR. I can save pics from an email and a text to pictures and post them. But I can’t post a pdf closed or open for some reason. Any idea’s? Anyone? Kim
famous bob
mopar misfit
Dont lookat me , I`m just looking across the top of the water on the pictures bit !
PM'd you my email. I'll see if I can do something.
Let’s see if this works
He did say he thinks the exhaust port is hurt because whoever was in there b4 enlarged the outside of the port to match the gasket. Kim
Thanks Chris, I got him to send me a pic. Saved it to pictures then posted it. Kim
A few more pics
I’m going to refrain from saying to much but what the hell is up with the intakes on number two. Damn something is messed up.
Ya idk. I seen that.
PRH
Well-Known Member
As cast, the SR ex ports are a fair amount smaller than 440-1 ex ports.
I have seen it before where someone made them about the same size as -1 ex ports.
It usually isn’t necessary to go quite that big.
That being said, if you buy the cnc ported SR’s from Indy....... they use the same program on the ex port as what they use for the -1’s.
I have a set of SR’s here for freshening that I ported about 20 years ago(actually the first set of them I ever did).
Here are a couple of pics of the ex port opening.
1st is with Indy header gasket, 2nd is a TTi gasket from 2” headers:
I have seen it before where someone made them about the same size as -1 ex ports.
It usually isn’t necessary to go quite that big.
That being said, if you buy the cnc ported SR’s from Indy....... they use the same program on the ex port as what they use for the -1’s.
I have a set of SR’s here for freshening that I ported about 20 years ago(actually the first set of them I ever did).
Here are a couple of pics of the ex port opening.
1st is with Indy header gasket, 2nd is a TTi gasket from 2” headers:
Last edited:
yellow rose
Overnight Sensation
yellow rose
Overnight Sensation
Ok John, let’s have it. We all value ur opinion. Kim
-
Similar threads
