dustoff440
Well-Known Member
Going with 70 up water pump and power steering pump and brackets and pulleys. What do I have here????????????
Next question where do I find a seal kit to reseal it before I put it on??
NAPA or any decent parts store. I think www.rockauto.com has them.
some pics for ya too.
After i screwed my first pulley up, and spent the next 2 months finding one. i took it to a machine shop and they changed it for me foe 10 bucks. easy. O72D
You can put a seal kit in it.
-Pull the pulley off.
-Hold the cast iron body in a vise by the snout.
-Remove 3? bolts in the back and the high pressure port/bolt.
-Lightly tap the can off from the body.
-Make sure the surface where the o-ring rides on the can is smooth and no big pits.
-croucus cloth/clean up can to o-ring contact surface.
-You can remove dents in the can now.
-put new o-ring around body and square o-rings for pressure port/bolt
-Re-install can
-chisel out front seal.
-tap evenly in new front seal
-re-instally pulley
Brooks, I think I have that piece you need, I'll send a pic of what i have.
Jeff