gdizzle
Well-Known Member
66 dart sedan, I have some trim off, but I can not figure out how this outer trim piece that goes around the rear glass trim is removed. How is it held on? Please help.
Help remove this trim piece without ruining it?
- Thread starter gdizzle
- Start date
-
You'll need a trim clip removal tool for the inner piece. The tool will have to go between the gasket and the inner stainless trim.
The outer piece is attached with screws and the glass and gasket have to be removed for access to the screws. They are a pain in
the *** to remove. Be patient and careful so you don't damage the trim.
gdizzle
Well-Known Member
Seriously? Wow, forget that I am not removing the glass. I guess we will have to mask as best we can and spray real good at that seam. Thanks LR for the info. That is exactly what I needed. I did by the tool, but looks like I won't be needing it.
gdizzle
Well-Known Member
Actually Lee, maybe I can remove that bottom section of the inner trim piece to make it easier to paint. Is it possible to just remove the bottom part of the inner trim piece near the trunk ? I have the tool. Or do I have to remove the entire inner trim . I see it has sections that overlap. Help?
You would want to remove the side pieces to access the bottom piece.
el5dart
Well-Known Member
i used the one with the triangle on the end to do mine. it was a pain in the *** but it worked. not sure if it was the right one.
Windshield/Door Trim Tool Set 4 Pc
Windshield/Door Trim Tool Set 4 Pc
Yes, thats the tool.
Triangle just releases hook thats inside the trim.
If there was a photo or something to help you understand the shape and location of clip, the less likely you will damage the moulding.
Triangle just releases hook thats inside the trim.
If there was a photo or something to help you understand the shape and location of clip, the less likely you will damage the moulding.
-
Similar threads
