el5dart
Well-Known Member
the problems never stop around here as far as getting this car put together. the problem i am having now is that the TTI x-pipe, extensions, and head pipe will not line up no matter what i do. my left headpipe is located below the outer crossmember bolt and my right headpipe is located at the inner crossmember bolt. i am coming up about an inch and a half narrow at the ends of the headpies to connect to the x-pipe extensions. and with everything connected loose and not bolted down about an inch and a half too wide at the right manifold. i have been trying to get the exhaust system physically in my possesion and installed for over a month now. very slow shipping and bad fitment quality control issues i suppose. i dont know maybe i am doing something wrong?
second picture is as close as i can get headpipe lined up to manifold with everything loosely fitted
i also included a picture that tti sent me showing the width of the headpipes but the picture is showing headers. theTTI picture says 15 1/4" mine measure about 14"
would anyone have a picture from under their car looking toward the front like the picture below showing the ends of the headpipes in relation to the transmission crossmember bolts?
second picture is as close as i can get headpipe lined up to manifold with everything loosely fitted
i also included a picture that tti sent me showing the width of the headpipes but the picture is showing headers. theTTI picture says 15 1/4" mine measure about 14"
would anyone have a picture from under their car looking toward the front like the picture below showing the ends of the headpipes in relation to the transmission crossmember bolts?
Last edited: