Will the Hemi Oil pan work with a 440 swap? Not afraid to modify it for idler clearance. My main thing is I would like a little extra capacity for a little piece of mind. Or is a stock pan enough for a 440 that is only a step or two above HP?
440 .040 over (78 c-body, not 187 pan)
KB237
Lunati voodoo 60304
MP template ported 902 heads, stock valve sizes
Externally balanced cast crank
Stock rods
Pistons .015 down
CH4B
750 4bbl
440 .040 over (78 c-body, not 187 pan)
KB237
Lunati voodoo 60304
MP template ported 902 heads, stock valve sizes
Externally balanced cast crank
Stock rods
Pistons .015 down
CH4B
750 4bbl