How To Add Shoulder Harnesses?

[doc540]

to a stock '61 four door Lancer

existing thread?

your experience?

Thanks

 

[67Dart273]

I don't know. Roll bar? Later seats with integrated belts? And if you do that, you'll have to beef the floor where they mount.

Some time ago, I did find some info on the optional belts for 67.......

The belts were fastened "somewhere" back by the side / back of the rear seat, and came up over the front seat.....

http://www.forabodiesonly.com/mopar/showthread.php?t=184851

I'm beginning to think they don't have the overhead anchors. If you look at the link I posted for the original options packet, they show:

The photo depicts a 'vert, with the belts obviously fastened "behind" somewhere on the main body.

But the part number shows the same number for all cars!!! (A bodies) This would SEEM to indicate that the same belt and same anchor is used whether convertible or hardtop

 

[doc540]

Thanks

Anyone else done it on an early A body?

 

[Martythetrimmer]

this is what I did to my 67 Dodge ute....doing similar to my 62 Plymouth Valiant...

not saying this is the right thing to do, but it is way heavier than factory mounts....I'd check with your local rego authority before doing anything!!

View attachment 28.jpg

View attachment 29.jpg

View attachment 30.jpg

View attachment 31.jpg

 

[doc540]

Much appreicated