I.d. this bog block 727

[jshank1991]

Hi I recently got this 727 trans with a 440 I bought does have torque converter. Just trying to figure out what year it is. Was told it's rebuilt so other question can I take the new internals out minus the valve body and put in a later date 727 core im needing a mechanical linkage shift trans for my 72 dart. Numbers on side are G2466147. 2181327 btw the engine does not match trans as its a 77 440 truck engine

 

[HemiSSDart]

Early trans, don't have my books handy. I guess I do, 1965 B&C body should be cable shift. Not sure you got all the 10,000 day and quantity built correct...

 

[Lefty71]

'65... Early trans with slip yoke, so that used to be the desirable one for folks wanting to eliminate the bolt-on driveshaft. Most likely "B" Body, standard or 4-bbl carb.

 

[Lefty71]

question can I take the new internals out

Count the spines on the input shaft... maybe someone has already updated it to later front clutch?? 19 splines if it's still old stuff.

 

[jshank1991]

Just counted 19 splines

 

[Lefty71]

Just counted 19 splines

So, likely all original inside. Your options are 1.) Sell it 2.) Rebuild as-is. Torque converters are available for those if you need one, but are more limited. 3.) Upgrade the front half of the trans with a later model (after '66) parts trans.

A&A Transmission is a good choice for the converter and other parts you may need. The valve body alone is sought after in your old trans if its not cracked.

 

[413]

It is a 65 and desirable to early cable shift guys.
Just sell it complete an build your newer trans.