pettybludart
Well-Known Member
I swapped over to disc brakes(from a 73 Swinger)on my 66 Dart lastyear and have only driven the car maybe 600 miles.Today while doing my fenderwell headers,I noticed that the ball joint looks like it has sunk into the UCA?When I did the swap,I replaced the lower balljoint to the bigger 73 one and just swapped uppers cause it had the big balljoint already.I,ve never done upper Bjoints on a Mopar,so is this pressed in or screwed in?I can see some threads.Checkout the pic..any advise will be appreaciated.Thanks.
P.S I also swapped the 6 cyl. for a 360,this was not like this lastyear.
P.S I also swapped the 6 cyl. for a 360,this was not like this lastyear.