10secdemon
Active Member
- Joined
- Jul 5, 2007
- Messages
- 26
- Reaction score
- 0
im in the process of making up a kit to install a R5 P7 motor in my car and was wondering if there was any interest out there from you guys if i made these kits up they would sell.
kit would include the adapters to bolt a 904 / 727 trans to them and use the mopar flex plate and convertor, front motor plate and mid plate ears and frame mounts, and step headers. bolt in deal for A and B/E bodys.
all you would need is to get the R5 P7 motor
on ebay they are pretty cheap when you look at what you get, billet crank and rods, 400 + cfm heads.over 800+ HP from the open motors.
Bob
kit would include the adapters to bolt a 904 / 727 trans to them and use the mopar flex plate and convertor, front motor plate and mid plate ears and frame mounts, and step headers. bolt in deal for A and B/E bodys.
all you would need is to get the R5 P7 motor
on ebay they are pretty cheap when you look at what you get, billet crank and rods, 400 + cfm heads.over 800+ HP from the open motors.
Bob
