LA to magnum

-
eccentricMagpies

eccentricMagpies

Well-Known Member
Joined
Nov 16, 2011
Messages
121
Reaction score
20
Location
Wisconsin
When rebuilding my 360 i had bought magnum heads to replace the LAs.

I'm looking ahead to when i install the headers and need new bolts for the heads to Headers.
Are these the same bolts I'd use for the LA or completely different set?

thanks
john
 
eccentricMagpies said:
When rebuilding my 360 i had bought magnum heads to replace the LAs.

I'm looking ahead to when i install the headers and need new bolts for the heads to Headers.
Are these the same bolts I'd use for the LA or completely different set?

thanks
john
Click to expand...

I used the same headers and bolts when I swapped out my 318 for the magnum motor, so they should be the same.
 
Okay. Thanks all

Second question: The bolts from the former heads are pretty much junk. Any recommendations on new bolts? There seems to be a wide variety out there.
 
Last edited:
eccentricMagpies said:
Okay. Thanks all

Second question: The bolts from the former heads are pretty much junk. Any recommendations on new bolts? There seems to be a wide variety out there.
Click to expand...

Magnum head bolts are "stretch to yield" and really should only be used once.
OE head bolts for your swap should be just fine, and you can get them about anywhere.
 
You must log in or register to reply here.
-

Back
Top