Captainkirk
Old School Mopar Warrior
OK...I'm at the point where I need to install subframe connectors, if I'm gonna do it.
Right now, car is up on jackstands; no motor, K-frame or suspension installed.
All doors, hood, decklid close with perfect gaps.
I was considering these:
http://www.manciniracing.com/maabo11whba.html
.....seeing as how this will mostly be a street car with maybe only a few strip runs.
1) Are bolt-in's acceptable for this type of use? (yes, I realize welding is better)
2) Is it OK to bolt them up with the car on jacks, no motor, suspension and K frame IF all the doors and gaps are good?
Right now, car is up on jackstands; no motor, K-frame or suspension installed.
All doors, hood, decklid close with perfect gaps.
I was considering these:
http://www.manciniracing.com/maabo11whba.html
.....seeing as how this will mostly be a street car with maybe only a few strip runs.
1) Are bolt-in's acceptable for this type of use? (yes, I realize welding is better)
2) Is it OK to bolt them up with the car on jacks, no motor, suspension and K frame IF all the doors and gaps are good?