lower control arm help please

[78kitcar]

im wrapping up my frontend rebuild and got stumped.DOES the lower control arm piviot shaft get a bushing where it bolts thur the k-frame?? see pics i would think it does but this is my first rebuild so i dont know.
Thanks

This is NOT my control arm just a pic for reference. he's going to have real problems if he doesnt push the shaft all the way in lol

 

[doug 371]

no there is not a bushing there...just where the shaft goes in the arm

 

[78kitcar]

no there is not a bushing there...just where the shaft goes in the arm

Thank you.

 

[78kitcar]

no there is not a bushing there...just where the shaft goes in the arm

Thank you

 

[RedFish]

There have been cases where the holes in the K member were worn egg shaped requiring repair.

 

[78kitcar]

There have been cases where the holes in the K member were worn egg shaped requiring repair.

Thankfuly not in my case!

 

[C130 Chief]

A coating of anti-seize never hurts.

 

[fanofpetty]

It appears in the picture that the shaft is not pressed in far enough on that control arm. I guess you'll find out when you try to install it.

 

[hemi71x]

For reference to this posting, here's a photo of the shafts pressed into the LCA's correctly.