Lower Radiator Hose

-

dartcuda1

67 Barracuda 500ci 6sp
Joined
Dec 2, 2008
Messages
1,747
Reaction score
183
Location
Malvern Pa
Hi I need pictures of the lower radiator hose with a milodon exteral oiling system 440ci.I want a formed hose the one I have will not fit because of the oil line in front pump.Thanks for any help
 
I went through this a few weeks back with more than one trip to the local parts store. What I ended up doing was going to the local pic a part and got 3 old hoses with a few bends in them, cut them apart and clamped the pieces together with some small exhaust pipe from local parts store until I had about the only configuration that would work. Took it off and gave it to my local napa store and they sent it in to their supplier and brought me back a suitable hose. Kinda the long way about it but it was a sure fire way. Good luck
 
What radiator did you use and do you have the hose part number from NAPA?
 
5110612-Rad_hose.jpg


Dayco 70678

http://board.moparts.org/ubbthreads...&Words=milodon&topic=&Search=true#Post5110328
 
Iv got somthin like that looking at me right now,

hey AndyF where can I buy a radiator hose like that? Iv had to run a remote filter to get around it all
 
Just go to NAPA and ask for the part number. Fairly common hose.
 
-
Back
Top