lug nuts

[Tadams]

What's the best way to clean these? These are 2 inch and are quite dirty.
Thanks

 

[chryslerfat]

Muratic acid will clean them up. If you want to go with a less corrosive product get wire rim cleaner for non coated rims. Either is caustic but wire rim cleaner is less caustic.

 

[Tadams]

Would you have any access to any of the 2in lug nuts. I still need a few for both sides. Left and Right Thread.

 

[chryslerfat]

Would you have any access to any of the 2in lug nuts. I still need a few for both sides. Left and Right Thread.

Sorry none here.

 

[clifcuda65]

304 Stainless Steel copies of the original style... Much stronger and durable then the original plated ones that the chrome would crack and rust...

I have "some" left from the last time I made a run on these in my shop...

A-Body 7/16-20 Thread Right & Left's

Clif of Az.:coffee2:

 

[Tadams]

How much. Not quite sure how many I need, But can check tomorrow. At work today. You can pm me

 

[Tadams]

More than likely 5 of each

 

[clifcuda65]

They are somewhat pricy... As they are hand made on an engine lathe (Not a CNC) from 304 Stainless...

Here is what the 304 Stainless Lugs look like installed with hubcap... One of my customers sent me this photo...

clif of Az. :coffee2: